Beauty Mark Dallas Retro Low Eave Window / Entry Awning - 4 Feet

Ask a Canopy Specialist: This Elegant Beauty-Mark Awning by Awntech is called the Dallas Retro Window / Entry Awning. Don't let the low price fool you. It is a structurally superior to any other modular products on the market and has the same structural integrity as a custom welded awning. Some of the quality features you may be looking for are...commercial strength frame and brackets, 8-year Acrylic fabric (fade, moisture, mildew & soil resistant), durable stitching , stainless steel hardware & high quality braided valance trim. These are standard features of the Dallas Retro Window / Entry Awning. This is not a flimsy awning that will blow off a building with a gust of wind. This awning has brawn as well as beauty. The Dallas Retro Window / Entry Awning has a designer look and feel, with 35+ acrylic solid & stripe choices. It comes partially assembled and is easy to install. Please Note: * This stationary awning is for 4 Foot wide windows and entries. * Awning Dimensions - Total Height (with valance) = 16 Inches; Width = 52.5 Inches; Projection = 30 Inches; * Valance Height = 6 Inches * Awning Weight = 17 lbs. * Minimum mounting height from ground/deck = 76 inches * Minimum mounting clearance above window/door = 4 inches * Minimum mounting clearance above window/door without covering any part of the window/door = 18 inches * Minimum mounting clearance on each side of awning = 2.5 inches * This item is custom made by the manufacturer and can not be returned unless defective.

Features

• For Windows or Entries.
• Residential & Commercial Applications.
Benefits
• Beauty & Function in one product
• Blocks up to 70% of heat uptake on west facing windows and doors.
• Protects furniture, floors and draperies from fading
• Protects skin from harmful UV rays.
• 5-year limited warranty.
Uses & Ideas
• Over windows
• Entry doors
• As an indoor window treatment
• With signage for a business entry (click for details)
Size & Function
• Outset width 4.5" (width is 2.25" beyond casement, each side)
• Stationary awning (not retractable)
Assembly & Installation
• Comes partially assembled & delivered to your door.
• Easy to assemble & install in about 1 hour (requires 1 installer)
• Comes with: Wall brackets, stainless steel hardware
• Minimum mounting height from ground/deck = 76 in.
• Minimum mounting clearance above window/door = 18 in.
• Required Tools: High speed drill/adjustable wrench/phillips & hex drivers/level/ladder/tape measure/chalk line/hammer
• Due to the wide variety of building surfaces, Awntech does not supply the hardware to install your awning on the wall. You will need to purchase installation hardware at your local hardware store. The manual (download below) will advise you on different surface applications.
Fabrication
• Fabric: Beauty-Markฎ Long Life Designer Outdoor Acrylic Fabrics.
• Resistant to fading, moisture, mildew & soil.
• Fabric Choices: Approximately 35 designer solids & stripes (see color chart)
• Frame: Structural aluminum tubing (commercial strength)
• Stitching: Beauty-Mark SuperStrength monofilament thread (will not rot or discolor)
Testing
• Tested to withstand Level 3 hurricane winds (125mph)
• Engineered to withstand heavy snow loads
• The Awning Support System meets or exceeds all Uniform Building Code requirementsManufacturer: Awntech
Part Number: ER1030-4
UPC: 731478842570

Related Articles & Product Manual

Turn Your Awning into a Promotional Tool with Custom Graphics - Free Quote!