Beauty Mark Dallas Retro Low Eave Window / Entry Awning - 10 Feet

Share This Item With Friends: Pin It Retro Low Eave, Beauty-Mark awnings add more than a protective covering to your windows or entry ways. They add atmosphere! Ten-ft. wide and protecting furniture, floors, and draperies from fading, the Dallas is made of designer outdoor acrylic fabrics which resist fading, moisture, mildew and soiling. Fabric choices can be made from 35 designer solids and stripes. The awning is sturdy, too, on a aluminum tubing frame and made to withstand winds up to 125 mph.

Features

• For Windows or Entries.
• Residential & Commercial Applications.
Benefits
• Beauty & Function in one product
• Blocks up to 70% of heat uptake on west facing windows and doors.
• Protects furniture, floors and draperies from fading
• Protects skin from harmful UV rays.
• 5-year limited warranty.
Uses & Ideas
• Over windows
• Entry doors
• As an indoor window treatment
• With signage for a business entry (click for details)
Size & Function
• Outset width 4.5" (width is 2.25" beyond casement, each side)
• Stationary awning (not retractable)
Assembly & Installation
• Comes partially assembled & delivered to your door.
• Easy to assemble & install in about 1 hour (requires 1 installer)
• Comes with: Wall brackets, stainless steel hardware
• Minimum mounting height from ground/deck = 76 in.
• Minimum mounting clearance above window/door = 18 in.
• Required Tools: High speed drill/adjustable wrench/phillips & hex drivers/level/ladder/tape measure/chalk line/hammer
• Due to the wide variety of building surfaces, Awntech does not supply the hardware to install your awning on the wall. You will need to purchase installation hardware at your local hardware store. The manual (download below) will advise you on different surface applications.
Fabrication
• Fabric: Beauty-Markฎ Long Life Designer Outdoor Acrylic Fabrics.
• Resistant to fading, moisture, mildew & soil.
• Fabric Choices: Approximately 35 designer solids & stripes (see color chart)
• Frame: Structural aluminum tubing (commercial strength)
• Stitching: Beauty-Mark SuperStrength monofilament thread (will not rot or discolor)
Testing
• Tested to withstand Level 3 hurricane winds (125mph)
• Engineered to withstand heavy snow loads
• The Awning Support System meets or exceeds all Uniform Building Code requirementsManufacturer: Awntech
Part Number: ER24-10
UPC: 731478279079

Related Articles & Product Manual

Turn Your Awning into a Promotional Tool with Custom Graphics - Free Quote!