Beauty Mark San Francisco Window Awning - 18 Feet

Share This Item With Friends: Pin It Dollar for dollar, there isn't a better production awning available than the Beauty Mark San Francisco Window Awning. It's perfect for windows or entries, for residential or commercial applications. This 18' awning features commercial strength frame and brackets, 8-year Acrylic fabric, durable stitching, stainless steel hardware and high quality braided valance trim. This is not a flimsy awning that will blow off a building with a gust of wind--it's been tested in hurricane winds up to 125 mph.

Features

• For Windows or Entries.
• Residential & Commercial Applications.
Benefits
• Beauty & Function in one product
• Blocks up to 70% of heat uptake on west facing windows and doors.
• Protects furniture, floors and draperies from fading
• Protects skin from harmful UV rays.
• 5-year limited warranty.
Uses & Ideas
• Over windows
• Entry doors
• As an indoor window treatment
• With signage for a business entry (click for details)
Size & Function
• Outset width 4.5" (width is 2.25" beyond casement, each side)
• Stationary awning (not retractable)
Assembly & Installation
• Comes partially assembled & delivered to your door.
• Easy to assemble & install in about 1 hour (requires 1 installer)
• Comes with: Wall brackets, stainless steel hardware
• Minimum mounting height from ground/deck = 76 in.
• Minimum mounting clearance above window/door = 18 in.
• Required Tools: High speed drill/adjustable wrench/phillips & hex drivers/level/ladder/tape measure/chalk line/hammer
• Due to the wide variety of building surfaces, Awntech does not supply the hardware to install your awning on the wall. You will need to purchase installation hardware at your local hardware store. The manual (download below) will advise you on different surface applications.
Fabrication
• Fabric: Beauty-Markฎ Long Life Designer Outdoor Acrylic Fabrics.
• Resistant to fading, moisture, mildew & soil.
• Fabric Choices: Approximately 35 designer solids & stripes (see color chart)
• Frame: Structural aluminum tubing (commercial strength)
• Stitching: Beauty-Mark SuperStrength monofilament thread (will not rot or discolor)
Testing
• Tested to withstand Level 3 hurricane winds (125mph)
• Engineered to withstand heavy snow loads
• The Awning Support System meets or exceeds all Uniform Building Code requirementsManufacturer: Awntech
Part Number: RF22-18K
UPC: 731478423359

Related Articles & Product Manual

Turn Your Awning into a Promotional Tool with Custom Graphics - Free Quote!