Beauty Mark Santa Fe Window / Entry Awning - 5 Feet

Share This Item With Friends: Pin It Provide the right fit for your 5 foot window or entryway with this Santa Fe awning. Designed to protect against intense heat and UV rays, this awning can also withstand Level 3 hurricane winds and heavy snow loads. Its Beauty Mark acrylic fabric resists fading, mildew, and dirt, allowing a long-lasting look for any of the more than 30 design options.Since the partially assembled product is delivered to your door, you will need only standard hardware and tools with only one hour to complete the installation. No hesitation is needed when deciding on this quality, durable, attractive 5 foot awning!

Features

• For Windows or Entries.
• Residential & Commercial Applications.
Benefits
• Beauty & Function in one product
• Blocks up to 70% of heat uptake on west facing windows and doors.
• Protects furniture, floors and draperies from fading
• Protects skin from harmful UV rays.
• 5-year limited warranty.
Uses & Ideas
• Over windows
• Entry doors
• As an indoor window treatment
• With signage for a business entry (click for details)
Size & Function
• Outset width 4.5" (width is 2.25" beyond casement, each side)
• Stationary awning (not retractable)
Assembly & Installation
• Comes partially assembled & delivered to your door.
• Easy to assemble & install in about 1 hour (requires 1 installer)
• Comes with: Wall brackets, stainless steel hardware
• Minimum mounting height from ground/deck = 76 in.
• Minimum mounting clearance above window/door = 18 in.
• Required Tools: High speed drill/adjustable wrench/phillips & hex drivers/level/ladder/tape measure/chalk line/hammer
• Due to the wide variety of building surfaces, Awntech does not supply the hardware to install your awning on the wall. You will need to purchase installation hardware at your local hardware store. The manual (download below) will advise you on different surface applications.
Fabrication
• Fabric: Beauty-Markฎ Long Life Designer Outdoor Acrylic Fabrics.
• Resistant to fading, moisture, mildew & soil.
• Fabric Choices: Approximately 35 designer solids & stripes (see color chart)
• Frame: Structural aluminum tubing (commercial strength)
• Stitching: Beauty-Mark SuperStrength monofilament thread (will not rot or discolor)
Testing
• Tested to withstand Level 3 hurricane winds (125mph)
• Engineered to withstand heavy snow loads
• The Awning Support System meets or exceeds all Uniform Building Code requirements • Available Accessories
Manufacturer: Awntech
Part Number: SANT33-5K
UPC: 731478748766

Related Articles & Product Manual

Turn Your Awning into a Promotional Tool with Custom Graphics - Free Quote!