Great Idea; Poor Execution
When functioning properly, these anchors do a great job. The anchor kits that I ordered failed on three counts. 1. The rods that are used to drive them into the ground get stuck in the anchors. This prompted me to leave a couple of the rods still stuck in the ground not allowing the anchors to toggle properly (they are holding under tension right now, so I left them that way). 2. Three of the eight anchors did not have adequate crimps on the ferrule. This allowed the cable to slip and required re-crimping or replacement cable clamps. 3. Two of the eight anchors failed at the drive tip allowing the rod to pass through the end of the anchor. This left me with shallow anchors that are holding in place, as of now.