Home Canopy Replacement Parts & Accessories Canopy Accessories
Caravan Displayshade Canopy Replacement parts

Caravan Displayshade Canopy Replacement parts

Frequently Purchased Together

Have questions?

Our experts are here to help!
Call us at 800-445-5611 Call us at 800-445-5611

Product Details

Manufacturer: Caravan Canopy
Caravan Canopy Part Numbers: 30059L
Item Number: CAR-DSPARTS
If it is time to replace the parts on your DisplayShade Canopy, then Caravan has the part you're looking for! Be sure that the canopy you are trying to match parts for is a Caravan Canopy brand DisplayShade model frame. Once you have matched the correct model, just locate the part you need-which is labeled by letter, and once you have matched the corresponding table for the Aluma canopy, you can buy individual parts by letter. The DisplayShade specs are as follows: The finish is grey and textured, the folded height is approximately 5 ft., the material is steel, the outer leg diameter is 1 1/8 inches, and the frame weight is 41 pounds.

Caravan Displayshade Characteristics

Finish: Grey, Textured
Folded Height: approx 5'
Material: Steel
outer leg diameter: 1-1/8"
Frame Weight: 41#

WARNING: This product can expose you to chemicals including Diethylhexyl Phthalate, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Please Note: Due to production changes, canopy frame colors may vary from year to year.

Also Note: Cost is per part and not for a set of parts/multiple parts.

Looking for specific info?

Customer Q&A with Product Specialists

Ken from OR asked:
Are just the nuts and 1 1/2 bolts available?
Are just the nuts and 1 1/2 bolts available?
Thank you for your inquiry. We suggest that you use the labeled diagram to help you determine what part you will need to repair your frame. You will see a part named "joint and bolt." Please use the link below. Caravan Displayshade Canopy Replacement Parts
Answered by: Emily - eCanopy Product Specialist

Helpful?

0
Mitchel from Los Angeles, CA asked:
I need two "struts" for my 10 x 10 DisplayShade and I believe that it is part number "O". The two struts in the photo are broken in half and are seen hanging down. Is part "O" the correct part that I need?
I need two "struts" for my 10 x 10 DisplayShade and I believe that it is part number "O". The two struts in the photo are broken in half and are seen hanging down. Is part "O" the correct part that I need?
Thank you for your quote request. You do have a Caravan Displayshade frame and from the photo you will need Part O if that is the only part broken. You can use the link below to place your order at your convenience. Displayshade Replacement Parts
Answered by: Emily - eCanopy Product Specialist

Helpful?

0
Daniel from Torrance, CA asked:
I have an old Caravan DisplayShade canopy. I need a replacement truss. I have a 10x10 canopy. Can you direct me to which truss is the correct replacement?
I have an old Caravan DisplayShade canopy. I need a replacement truss. I have a 10x10 canopy. Can you direct me to which truss is the correct replacement?
Answered by: Dawn H. - eCanopy Product Specialist
Carlos from Glendale, AZ asked:
Are all the truss bars the same size, because I have broken the four bars that hold the center pole.
Are all the truss bars the same size, because I have broken the four bars that hold the center pole.
The truss bars for the Displayshade are the same size.
Answered by: Magan B.

Helpful?

0
Showing 4 of 4 Questions and Answers
Ask a Question

Customer Reviews